Heat N Glo Fireplace Won'T Light?

May 2023 · 2 minute read

Why is my fireplace not lighting up?

It is possible that the spark igniter and thermocouple are faulty if gas is flowing out of the tubing even if there is no obstruction. Check to see if there’s anything in the way. Changing the igniter if the pilot light starts but doesn’t stay lit is a possibility.

Why is my propane fireplace not lighting?

Step 1 – Verify that the gas is on by checking the main valve. If the gas is on, but the pilot light hasn’t worked in a while, you can try removing the air from the pilot tube to see if that helps. Maintaining pressure on the pilot button for about two minutes while the air is bled out will accomplish this goal successfully.

How do you light the pilot on a Heat N Glo fireplace?

Press the red piezo button repeatedly (once every second) until the pilot ignites while holding down the valve knob (in “PILOT” position – it should press in about 1/4″). Wait five minutes before trying again if the pilot light doesn’t work.

Why is my gas fireplace not getting gas?

Having no gas flow is most likely due to a blocked gas diffuser or a valve that has been turned off in a gas fireplace. Remove the front grille, turn off the gas valve, and remove the diffuser to clean it in order to fix this problem. Before reinstalling the diffuser, clean it with a vacuum. Once you’ve turned on the gas valve, everything should start working.

How do I reset my electric fireplace?

SOLUTION: Turn off all switches and unplug the device from the wall for at least five minutes to see if the problem persists. Restart everything after a five-minute pause.

ncG1vNJzZmijqaG8r7zOsJylpF6YvK57x56YrWWeYrStu4yfoKudoKGupLGMsKanrF2htqi002g%3D