How much should I charge for stripping and waxing floors?

Stripping and waxing a floor should cost no more than $174, according to HomeWyse. Costs start at about $148 and go up to about $200 depending on your location. This cost estimate is based on a 314-square-foot space. This works out to an average cost of $1.80 per square foot for stripping and waxing a floor.

How much does it cost to strip and wax a floor per square foot?

The cost of a strip and wax is calculated on a square foot basis. The national average is 30 to 60 cents per square foot, but this can vary based on a variety of factors. There are exceptions to this rule, however, and some jobs can cost as much as 90 cents or more.

How long does it take to strip and wax a floor?

Overall, the stripping process takes about fifteen minutes to sit before agitation is applied to the floors when using a chemical stripping agent It is possible to use the wax the following day after it has been applied.

Do you have to strip a floor before waxing?

In theory, you can wax the floor right away without scrubbing it first. If, on the other hand, you suspect that the floor has too many coats of wax and is therefore dull, you should remove the old coat before applying a new one.

How many coats of wax should you put on a floor?

Always keep more wax on hand than you think you’ll need. Avoid running out of wax before the job is complete. A gallon of our Optimal Wet Look Floor Finish, for example, will cover about 2,000 square feet of floor area when used as directed. Each finish is unique, but a typical recommendation is for four to five coats.

How much is a floor stripper?

Generally speaking, 1 gallon of diluted stripper per 100 square feet of floor is a good starting point for stripper application. Adding 1 gallon of the concentrate to 5 gallons of water, or 6 gallons in total, is the recommended dilution ratio for most strippers.

ncG1vNJzZmijqaG8r7zOsJylpF6YvK57x6iuZqWlmLVusM6eqmahpGKwsL%2FTZquoZaOpv6q8jJqlnWWnlsVussuopqurXw%3D%3D